- Al Sajaa Industrial - Emirates Industrial City – Sharjah
The SL-CS1 Chemical Absorbent Sock is a flexible, heavy-duty spill containment tool built to stop hazardous liquids right at the source. Measuring 7.5cm by 1.2m, these socks bend easily to fit around corners, uneven floors, and machinery bases. They create a secure perimeter that blocks aggressive chemical spills before they can spread across your workshop, contaminate nearby work zones, or seep into drainage channels.
With a bright yellow color for fast identification during an emergency, each sock features a tough knitted outer skin and a treated hydrophilic fill that safely absorbs up to 6 liters of fluids. It is the dependable, everyday solution for industrial spill response, leak management, and laboratory safety.
| Specification | Details |
|---|---|
| Product Code | SL-CS1 |
| Description | Chemical Sock 7.5cm × 1.2m |
| Chemical Absorbency | 6 L/Kg |
| Water Absorbency | 3.6 L/Kg |
| Pack Quantity | 20 Socks per Box |
| Net Weight | 8.5 Kgs |
| Qty per Pallet | 18 |
| Color | Yellow |
| Size | 7.5cm × 1.2m |
| Outer Construction | Yellow Knitted Polypropylene Skin |
| Fill | Treated Hydrophilic Absorbent |
| End Construction | Stitched both ends — chemical reaction resistant |
| Type | Hydrophobic |
| Category | Chemical Absorbents / Socks / Spill Containment / Industrial |
The primary job of the SL-CS1 is containment. By placing these socks around the outer boundary of a fresh leak, you create a reliable physical barrier. This stops hazardous liquids from traveling across floor surfaces and entering pedestrian paths, nearby workspaces, or environmental drainage points. Laying down these socks immediately gives your team time to safely deploy additional cleanup resources inside the protected zone.
Keep your floors clean and slip-free by placing socks directly against the base of problematic machinery, beneath dripping pipe joints, or around seeping valve bodies. Because the sock format is highly flexible, it easily hugs irregular equipment shapes and sits flush against uneven concrete surfaces where rigid plastic trays fail to make a proper seal.
The treated interior fill is formulated to cope with a massive variety of industrial fluids. It safely absorbs and holds acids, alkaline solutions, acetate, chlorinated solvents, benzene, toluene, oils, and water. This wide compatibility makes the SL-CS1 an excellent all-in-one choice for facilities that store multiple types of chemicals, eliminating guesswork when a mixed spill occurs.
At 1.2 meters long, these socks give you the freedom to shape your barrier however the situation demands. You can lay them out in straight lines, bend them around circular machine footprints, shape them into tight L-shapes around corner walls, or link multiple units end-to-end to build an extended containment run. The product molds to the space available, rather than forcing you to adjust your setup.
The yellow polypropylene outer skin provides structural strength during both deployment and final pickup. It keeps its shape even when completely soaked with liquid, resists tearing if you need to reposition it, and offers a textured grip that clings to wet floors so the sock won’t float away on shallow pools of chemical waste.
Both ends of the sock are tightly stitched closed. This keeps the internal absorbent fill completely trapped inside, ensuring an even distribution of material throughout the entire length of the product. More importantly, it prevents fine dust or filler from migrating out and reacting unexpectedly with the spilled liquid, ensuring safer handling from initial placement to final disposal.
Drains and thresholds are critical vulnerabilities during a liquid spill. You can lay these socks directly across floor drains, along doorway lines, and around containment bund edges to form a protective dam. The flexible profile packs down tight into small floor transitions and gaps, sealing off path options that flat pads can’t protect.
In a hectic emergency, every second matters. The high-visibility yellow color lets your response team immediately recognize this as a chemical-grade absorbent. This clear color-coding separates it from universal gray or oil-only white options in your inventory, preventing dangerous mistakes and ensuring staff grab the correct safety tool under pressure.
These socks possess inert material properties and are not classified as hazardous goods. No special transport regulations or shipping restrictions apply for logistics or internal facility movement.
The product carries no inherent health risks when completely dry and uncontaminated. However, once the sock is saturated, it takes on the hazards of whatever liquid it has absorbed. Always consult the specific chemical’s Safety Data Sheet (SDS) to determine the necessary protective equipment (such as gloves, goggles, or suits) required for cleanup.
To keep the absorbency performance at its peak, store the boxes in a cool, dry place away from moisture, open heat sources, and direct sunlight. Keep the socks sealed in their original packaging until they are needed on the floor.
Used, saturated socks must be handled and disposed of in full compliance with the laws governing the absorbed liquid. Never throw chemically contaminated socks into regular garbage bins. Follow your facility’s specific hazardous waste protocols and local environmental regulations.
Chemical Absorbent Pillows are engineered specifically for these situations — flexible, high-capacity cushion absorbents that conform to irregular surfaces.
The SL-CC1 Chemical Absorbent Pillow is a purpose-engineered spill response solution designed to absorb a wide spectrum of hazardous and non-hazardous chemical liquids quickly and safely.
The SL-CC2 is a large-format, heavy-duty chemical absorbent pillow engineered for high-volume chemical spill absorption in demanding industrial, laboratory, and chemical storage environments.
Chemical spills in industrial environments demand more than a standard absorbent response. They demand speed, capacity, coverage, and a product that can be deployed quickly across the exact footprint of the incident
The SL-CR1 is our largest and most powerful chemical absorbent roll — a heavy-weight, maximum-capacity sorbent solution engineered for serious chemical spill response and proactive industrial spill prevention.
The SL-CR2 is a heavy-weight, high-capacity chemical absorbent roll delivering the same exceptional 192-litre absorption performance as the SL-CR1
The SL-C200 is our most popular chemical absorbent pad — a light weight, high-value, daily-use sorbent solution trusted across industrial facilities, laboratories.
ESNICO’s chemical absorbent socks are your first line of defense when a hazardous spill occurs. These flexible, fast-acting tools are designed to wrap around leaks and contain aggressive liquids before they can spread.
The SL-CS1 Chemical Absorbent Sock is a flexible, heavy-duty spill containment tool built to stop hazardous liquids right at the source.
The SL-CS2 is a heavy-duty, extended-length chemical absorbent sock built for large spill perimeters and high-volume fluid containment.
Don’t hesitate to contact us for more information about company or service