- Al Sajaa Industrial - Emirates Industrial City – Sharjah
The ESW06108 is a compact, lightweight portable eyewash station designed to deliver immediate emergency decontamination to the eyes and face wherever hazardous substances are handled. Built from high-quality corrosion-resistant polyethylene and finished in high-visibility green, it holds 8 gallons (30 litres) of flushing solution and delivers a consistent 15-minute gravity-fed flush — fully compliant with ANSI Z358.1-2014. Wall-mountable or freestanding, the ESW06108 is the agile, space-efficient portable eyewash solution for laboratories, construction sites, and industrial environments where compact deployment and reliable emergency performance are equally essential.
| Specification | Details |
|---|---|
| Model | ESW06014 |
| Capacity | 14 Gal / 53 L |
| Flow Rate | 0.4 Gal / 1.5 L per minute |
| Flush Time | ≥ 15 minutes |
| Water Pressure | Gravity-fed |
| Material | PE (Polyethylene) |
| Dimensions H×W×D | 640 × 503 × 245 mm |
| Weight | 7.8 Kgs |
| Ambient Operating Temperature | 5°C – 35°C |
| Color | Yellow |
| Mounting Options | Wall-mountable / Freestanding |
| Compliance Standard | ANSI Z358.1-2014 |
| Maintenance Interval | Monthly inspection / Annual full service |
| Category | Emergency Eyewash / First Response Safety / Portable Units |
The ESW06108’s smaller 30-litre footprint makes it the ideal choice for facilities and work zones where space is limited but emergency eyewash coverage is mandatory. Fitting neatly into confined laboratories, narrow industrial passages, compact site offices, and tight storage areas, it delivers full ANSI-compliant emergency flushing capability without the spatial demands of larger portable units.
Chemical exposure incidents demand instant response — every second of delay increases the severity of eye and tissue damage. The ESW06108 is positioned at the hazard point and activates immediately with a simple, instinctive mechanism — delivering a consistent 1.5 litre per minute flush that begins decontamination before stress and disorientation can slow response time.
The gravity-fed design operates with complete independence from mains water supply, plumbing infrastructure, and electrical systems. This makes the ESW06108 equally effective in remote outdoor work sites, temporary construction zones, mobile laboratories, and fixed facilities — a truly versatile emergency response tool that works wherever your workforce operates.
ANSI Z358.1-2014 mandates a minimum 15-minute continuous flush — the medically established duration for effective chemical decontamination of the eyes. The ESW06108 meets this requirement precisely, delivering uninterrupted flow for the full treatment duration from its 30-litre tank at the specified 1.5 L/min flow rate — providing documented, auditable compliance for workplace safety inspections.
Wall-mount the ESW06108 permanently in fixed chemical handling areas for always-ready access, or deploy it freestanding in temporary work zones, outdoor sites, or rotating operational locations. The same unit adapts to both configurations without modification — maximising deployment versatility across diverse facility and site requirements.
The ESW06108’s distinctive green finish ensures it stands out clearly in busy industrial environments, cluttered site areas, and low-light conditions — allowing anyone in a chemical exposure emergency to locate the unit instantly without searching. Fast identification is the first step to fast treatment.
The polyethylene construction provides inherent resistance to corrosion, chemical splashes, and environmental degradation — maintaining the unit’s structural integrity and internal hygiene standards throughout its service life. No rust, no chemical attack, no contamination of the stored flushing solution.
The ESW06108’s straightforward monthly inspection and annual full service schedule keeps maintenance demands minimal without compromising emergency readiness. Easy-to-clean components and a simple design mean the unit stays in full operational condition with minimal facility resource commitment — because emergency equipment that is neglected is emergency equipment that fails.
Lightweight at 7 Kgs empty. Transport empty and fill at the deployment location. No hazardous goods classification applies to the unit.
Fill only with clean potable water or an approved sterile eyewash solution. Maintain solution temperature within the 5°C–35°C operating range. Replace flushing solution immediately after any activation event and at recommended maintenance intervals to ensure hygiene and effectiveness.
Position within 10 seconds travel time from any chemical hazard area in compliance with ANSI Z358.1-2014 placement requirements. Ensure the unit is clearly visible, unobstructed, and accessible at all times. For wall mounting, secure to a load-bearing surface capable of supporting the filled unit weight.
Conduct monthly visual inspection of tank integrity, activation mechanism, nozzles, and overall unit condition. Perform annual full service including complete drain, clean, and refill. Replace solution immediately after any emergency activation. Maintain a service and inspection log for safety audit compliance.
Polyethylene tank and components are recyclable. Dispose of used flushing solution in compliance with local wastewater and environmental regulations, particularly if contaminated with hazardous substances during an emergency flush event.
Certified to ANSI Z358.1-2014 — the internationally recognised standard for emergency eyewash and shower equipment performance and placement.
The ESW06014 Portable Eyewash Station is a critical first-response safety device engineered to deliver immediate
The ESW06108 is a compact, lightweight portable eyewash station designed to deliver immediate emergency
The ESW010MS-F is a professional-grade combination emergency shower and eyewash station engineered to deliver immediate
The ESW020MS is a permanently installed, professional-grade wall-mounted eyewash station engineered for immediate emergency flushing of eyes
Engineered with a space-efficient 30-litre capacity, the Portable Eyewash Station ESW06108 is specifically tailored for tight setups. It fits perfectly into confined laboratories, compact site offices, narrow facility corridors, and small storage rooms where a bulkier emergency station would obstruct daily operations.
Yes, it offers uncompromised regulatory protection. The unit is fully certified to the ANSI Z358.1-2014 standard, meaning its 8-gallon reservoir provides the medically required 15-minute continuous, uninterrupted flush at a stable flow rate of 1.5 litres per minute to neutralize eye injuries.
Because the system runs purely on gravity, it features zero dependency on electrical wiring, mains plumbing networks, or pressurized water lines. This allows your safety team to deploy reliable emergency first-aid protection in remote outdoor worksites, mobile field labs, or changing construction zones.
During a volatile chemical splash or dust exposure incident, every second spent searching reduces treatment success. The distinctive green chassis is chosen because it stands out prominently against industrial workspace walls and cluttered equipment bays, ensuring distressed personnel can spot it instantly.
The purpose of sorbent is to absorb spilled liquids from the surface of the affected spill area and clean the spill.
Absolutely. The structural framework features complete dual-mounting flexibility. It can be mounted permanently to a load-bearing wall using its heavy-duty bracket for dedicated chemical handling bays, or placed freestanding on a secure flat counter within temporary or rotating operational zones.
The body is manufactured from high-grade, corrosion-resistant polyethylene (PE). This durable material easily withstands harsh chemical splashes, environmental moisture, and UV exposure without rusting, cracking, or degrading, ensuring the internal flushing water remains perfectly sanitary.
This low-maintenance design requires minimal resources. It simply needs a quick monthly visual inspection to verify the tank integrity, nozzle cleanliness, and activation mechanism. Once a year, perform a full service by completely draining the 30-litre tank, cleaning the inner lining, and refilling it.
No hazardous logistics classifications apply to this item. Weighing only 7kg when empty, the Portable Eyewash Station ESW06108 is exceptionally lightweight and agile. For safe internal transport and shipping, simply move the unit empty and fill it with potable water at its final deployment spot.
Don’t hesitate to contact us for more information about company or service