Emergency Shower and Eyewash Station with Foot Pedal ESW010MS-F

Complete Full-Body Chemical Decontamination in a Single Unit

The ESW010MS-F combines a high-volume emergency shower and an aerated eyewash station in one integrated unit — providing complete head-to-toe decontamination capability from a single installation point. When a chemical spill affects the body, face, and eyes simultaneously — the most common and most serious exposure scenario — the ESW010MS-F addresses all contamination zones instantly and simultaneously, without the worker needing to locate separate units under duress. .

Immediate Eye and Face Decontamination at the Point of Need

Chemical exposure incidents demand instant response — every second of delay increases the severity of eye and tissue damage. The ESW06108 is positioned at the hazard point and activates immediately with a simple, instinctive mechanism — delivering a consistent 1.5 litre per minute flush that begins decontamination before stress and disorientation can slow response time.

Foot Pedal Activation — Hands-Free Operation When It Matters Most

The defining safety advancement of the ESW010MS-F is its stainless steel foot pedal activation system. When a worker’s hands, arms, and face are contaminated with hazardous chemicals, operating a hand-activated valve is both painful and counterproductive — spreading contamination further. The foot pedal allows full shower and eyewash activation with a single foot press, keeping contaminated hands and arms away from control surfaces and enabling immediate decontamination to begin without hesitation or additional contact injury.

ANSI Z358.1-2014 Compliant 15-Minute Flush

ANSI Z358.1-2014 mandates a minimum 15-minute continuous flush — the medically established duration for effective chemical decontamination of the eyes. The ESW06108 meets this requirement precisely, delivering uninterrupted flow for the full treatment duration from its 30-litre tank at the specified 1.5 L/min flow rate — providing documented, auditable compliance for workplace safety inspections.

High-Volume Emergency Shower for Rapid Full-Body Decontamination

The stainless steel 304 shower head delivers a powerful 75.7 litres per minute — the ANSI Z358.1-2014 specified minimum for emergency shower equipment — providing the volume and coverage needed to rapidly dilute and wash hazardous substances from the entire body surface. This high-flow performance is critical in incidents involving corrosive chemicals where every additional second of skin contact increases the severity and depth of chemical burns.

Aerated Eyewash Nozzles for Gentle, Effective Eye Flushing

The stainless steel filter mesh eyewash nozzles deliver an aerated water stream at 11.4 L/min — mixing air into the flow to create a softer, more comfortable flush that covers the eye surface comprehensively without causing additional trauma to already injured tissue. Harmful substances are flushed away rapidly while the aerated flow minimises the discomfort that causes casualties to pull away from the eyewash stream prematurely — maximising treatment effectiveness.

Fully Certified to ANSI Z358.1-2014

Every performance parameter of the ESW010MS-F — shower flow rate, eyewash flow rate, operating pressure range, and activation mechanism — meets the requirements of ANSI Z358.1-2014, the internationally recognised standard for emergency eyewash and shower equipment. This certification provides documented, auditable compliance for regulatory inspections, insurance assessments, and workplace safety management systems across all industry sectors.

Complete Stainless Steel 304 Construction for Maximum Durability

Every single component — from the largest pipe fitting to the foot pedal kit — is manufactured from stainless steel 304. This material choice delivers exceptional resistance to corrosion, chemical exposure, and physical wear in the harshest industrial environments. No plastic components to crack, no chrome plating to peel, no rust to contaminate the water supply — just consistent, hygienic, long-life performance throughout years of industrial service.

Dual Activation Options for Operational Flexibility

Beyond the foot pedal, the ESW010MS-F also features a pull rod kit and push plate — providing multiple activation methods to accommodate different emergency scenarios, physical conditions, and user capabilities. Whether a worker activates with their foot, pulls the rod, or pushes the plate, full flow is achieved immediately — ensuring no activation method becomes a barrier to emergency treatment.

High-Flow Pressure-Regulated Performance

Operating between 250 and 400 kPa, the ESW010MS-F maintains consistent shower and eyewash flow rates regardless of fluctuations in the facility’s mains water supply pressure. Reliable, regulated performance ensures the unit delivers its specified flow rates every time it is activated — not just under ideal conditions.