- Al Sajaa Industrial - Emirates Industrial City – Sharjah
The ESW06014 Portable Eyewash Station is a critical first-response safety device engineered to deliver immediate, effective decontamination to the eyes and face following exposure to hazardous chemicals, dust, or other dangerous substances. Built from high-quality corrosion-resistant polyethylene, gravity-fed for zero plumbing dependency, and certified to ANSI Z358.1-2014, it provides a consistent 15-minute flush at the point of need — wherever that point may be. Compact, lightweight, and highly visible in safety yellow, the ESW06014 is the dependable portable eyewash solution for laboratories, industrial facilities, construction sites, and any workplace where chemical exposure risk exists.
| Specification | Details |
|---|---|
| Model | ESW06014 |
| Capacity | 14 Gal / 53 L |
| Flow Rate | 0.4 Gal / 1.5 L per minute |
| Flush Time | ≥ 15 minutes |
| Water Pressure | Gravity-fed |
| Material | PE (Polyethylene) |
| Dimensions H×W×D | 640 × 503 × 245 mm |
| Weight | 7.8 Kgs |
| Ambient Operating Temperature | 5°C – 35°C |
| Color | Yellow |
| Mounting Options | Wall-mountable / Freestanding |
| Compliance Standard | ANSI Z358.1-2014 |
| Maintenance Interval | Monthly inspection / Annual full service |
| Category | Emergency Eyewash / First Response Safety / Portable Units |
Lightweight and portable at 7.8 Kgs. Transport empty and fill at the deployment location. No hazardous goods classification applies to the unit itself.
Fill only with clean, potable water or an approved sterile eyewash solution. Do not use with solutions outside the recommended operating temperature range of 5°C–35°C. Inspect unit monthly and replace flushing solution at recommended intervals to maintain hygiene and effectiveness.
Position within 10 seconds travel time from any chemical hazard area in compliance with ANSI Z358.1-2014 placement requirements. Ensure the unit is clearly visible, unobstructed, and accessible at all times. For wall mounting, ensure the bracket is secured to a load-bearing surface capable of supporting the filled unit weight.
Conduct monthly visual inspection of the unit, activation mechanism, nozzles, and tank integrity. Perform annual full service including complete tank drain, clean, and refill. Replace flushing solution immediately after any activation event. Keep a maintenance log to demonstrate compliance during safety audits.
Polyethylene tank and components are recyclable. Dispose of used flushing solution in compliance with local wastewater and environmental regulations, particularly if contaminated with hazardous substances.
Certified to ANSI Z358.1-2014 — the internationally recognised standard for emergency eyewash and shower equipment performance and placement requirements.
The ESW06014 Portable Eyewash Station is a critical first-response safety device engineered to deliver immediate
The ESW06108 is a compact, lightweight portable eyewash station designed to deliver immediate emergency
The ESW010MS-F is a professional-grade combination emergency shower and eyewash station engineered to deliver immediate
The ESW020MS is a permanently installed, professional-grade wall-mounted eyewash station engineered for immediate emergency flushing of eyes
The gravity-fed architecture eliminates any dependency on pressurized mains water infrastructure or plumbing lines. This self-contained setup ensures that the Portable Eyewash Station ESW06014 operates completely independently, functioning reliably in remote construction sites, temporary work bays, and outdoor chemical storage yards.
Yes. This unit is fully certified to meet the strict ANSI Z358.1-2014 regulatory standard. It safely stores 53 litres of potable fluid to provide a continuous, uniform flush rate of 1.5 litres per minute for a minimum of 15 minutes, satisfying the medically required decontamination window to treat injured personnel.
The unit features a highly intuitive, high-visibility activation mechanism. An injured technician with compromised or obscured vision can simply grab the central tray and pull it downward. This single, fluid action instantly engages the dual spray heads, delivering a continuous stream of soothing water without complex valves to locate.
The entire tank assembly is molded from high-density, corrosion-resistant polyethylene. Unlike traditional metal installations that can rust or experience chemical oxidation over time in aggressive environments, this durable polymer structure keeps the internal fluid completely clean and free from metal-flake contamination.
Absolutely. The structural layout provides dual mounting flexibility to accommodate diverse facility needs. You can secure it permanently to a structural wall using the heavy-duty mounting bracket in fixed chemical handling areas, or position it freestanding on a stable flat surface within changing temporary work zones.
During a critical chemical flash event, saving seconds prevents permanent ocular damage. The striking safety yellow finish is chosen because it stands out prominently across busy, cluttered, or dimly lit industrial environments, enabling distressed workers to immediately spot the unit from up to 10 seconds of travel time away.
Keep the safety unit in full operational readiness by scheduling quick monthly visual inspections of the nozzle openings, pull mechanism, and fluid levels. Once a year, perform a full system service by completely draining the tank, sanitizing the internal lining, and refilling it with clean water and fresh preservation solution.
The empty polyethylene structure itself is fully recyclable. However, once the Portable Eyewash Station ESW06014 is deployed to treat a chemical splash, the runoff fluid must be captured and disposed of according to the precise safety protocols governing the specific hazardous chemical or acid that was flushed away.
Don’t hesitate to contact us for more information about company or service